• Comes in Flat Matt (210), Matt (220), Satin (230) or Gloss (240) sheen levels
  • Easy to apply - buffed, brushed or rolled on
  • Quick drying - usually dry within 3-6 hours
  • Low odour
  • Water resistant
  • Very durable - further strengthened with Treatex hardener
  • Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean
  • Has a warming effect on lighter coloured timbers
  • No sanding required between coats
  • Withstands high temperatures
  • Very durable
  • Easy to maintain with Treatex Wax Polish
  • Spot repairable
  • Slip resistance test BS 7976-2PTV. Suitable for domestic, commercial and wet areas. 
  • Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc
  • Safe for use on children’s toys: DIN EN 71-3
  • Meets with VOC emissions regulations
  • Recommended for those with dust allergies; dirt and dust can be removed easily
  • Contains no biocides, preservatives or carcinogens
  • Slip resistance further increased with the addition of Treatex R12 Anti-Slip additive

Applications: Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.

Coverage

1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application.
2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application.
10L will cover approximately 200m² in one coat / 120m² in two coats depending in the timber and method of application.
1L will cover approximately 3 doors in two coats depending on the timber and method of application.

Compatible with

Treatex Colour Tones / Hardener / Thinner / Natural Hardwax Oil / Wax Polish / Floor Care / Preparation Cleaner / R12 Anti-Slip additive.

Application Method 1

  • Sand 120-150 grit
  • Apply a thin coat of ULTRA using a good quality roller
  • Leave for 10 minutes
  • Slow buff with a soft pad to remove excess
  • Finish using a lint free cloth under the buffer
  • Leave for 45 minutes to dry with good ventilation
  • Apply the final coat with best quality microfibre roller
  • Usually ready for use after 8 hours
  • Usually ready for furniture after 18 hours

Application Method 2

  • Sand 100-150 grit
  • Apply the first coat using a good quality brush or roller
  • First coat will usually be dry within 3-6 hours with good ventilation
  • Apply the second coat using a good quality brush or roller
  • Usually ready for use after 8 hours
  • Usually ready for furniture after 18 hours